Remote Displays with MODBUS RTU
 


Remote Displays

G Instruments designs and manufactures a range of remote displays with very high accuracy, many features and field programmability. They can be reprogrammed in seconds on the field to accept different input signal, to offset or span the display reading or to produce a different output. They all have a RS232 MODBUS RTU communication port which can be connected (through a RS232-RS485 converter) to a network and provide both accurate information for the input signal to the remote master and a local accurate reading in engineering units.

Our ''input'' type remote displays very accuratelly measure different analog signals, provide a local display and digital information to the remote master. The master can also be connected through wireless modules or long range radio devices and control or receive information from them from a long distance.
Using only two wires our ''input'' type remote displays can be directly connected to all of our flow computers / totalizers and temperature transmiiters, power their analog outputs, accuratelly measure the signal, display flow rate, temperature and other parameters, and provide digital information to the master.

Our ''output'' type remote displays provide a local display reading and an isolated analog ouput both controlled by the remote master. The analog output can connect to a SCADA, PLC or just control a pump or other device remotelly. The master can also be connected through wireless modules or long range radio devices and control them from a long distance.




 
Remote Displays with MODBUS RTU