Pulse converters for flow meters totalizers or magmeters
 


Other Devices

G Instruments frequently introduces new devices for different applications in many different fields. Please contact us to find out about our current or future developments or to discuss custom devices for you.


Pulse Converter / Linearizer GPC5K
Pulse linearizer
GPC5K has a 30 point calibration / linearization table and an isolated output which frequency is related to the input frequency through the 30 point table. This way GPC5K can be used, for an instance to linearize and isolate flow meters or other devices with a pulse output. The output can be 5V square wave or open drain.


Pulse Totalizer GPT36
GPT36 is a micro power pulse totalizer with universal input. It has an input for a fast remote reset. When the input terminals are shorted it immediatelly clears the total number of pulses and starts totalizing again until the remote input opens.
  • ACCEPTS NPN, PNP, REED SWITCH, WAVES, LOGICAL SIGNALS AND COILS
  • NO PRE-AMPLIFIERS FOR THE COILS ARE NEEDED
  • 10 kHz MAX INPUT FREQUENCY
  • WORKS ON A SINGLE AA SIZE REPLACEABLE BATTERY
  • HIGH PROTECTION ON BOTH INPUTS
  • CAN POWER MICRO POWER SENSORS
  • FAST REMOTE RESET
  • LOBAT INDICATOR
Stop Watch GSW43
GSW43 is a micro power stop watch that can be used for precise time measurements. It has an input for a fast remote start/stop. If enabled it immediatelly clears the time and starts measuring until the remote input disables it.
  • MEASURES TIME UP TO 10,000 SECONDS
  • 1 ms RESOLUTION
  • TOTAL ERROR LOWER THAN 0.005% + 2 ms
  • WORKS ON A SINGLE AA SIZE REPLACEABLE BATTERY
  • HIGH PROTECTION ON THE INPUT
  • FAST REMOTE ENABLE
  • LOBAT INDICATOR



 
Pulse converters for flow meters totalizers or magmeters