Universal programmable temperature transmitters with MODBUS RTU ...
 


Analog Signal Isolators

G Instruments designs and manufactures a range of isolators with high functionality and reliability. Our analog signals isolators and splitters have high acuracy, high isolation and small size. They are DIN rail mount, passive or active.


Passive Input, Passive Output 4-20 mA Isolator
DIN rail analog isolator

GAi31 is a DIN rail mount 4-20 mA isolator with passive input and passive output. Both input and output connect with two only wires.


Passive Input, Passive Output 4-20 mA Splitter
DIN rail ahnalog splitter

GAi32 is a DIN rail mount 4-20 mA splitter with passive input and two passive outputs. All connect with two only wires


Passive / Active Input, Passive / Active Output Universal Analog Isolator
Universal analog isolator

GAi33 is a DIN rail mount isolator for analog signals. Both input and output independently can be configured to any combination of active / passive, 0-20 mA, 4-20 mA, 0-5 V, 0-10 V, 1-5 V, 2-10 V. It needs 24 VDC (21.6 - 26.4 V) for power. No programming required, the device can be configured on the field in seconds by setting a couple of DIP switches only.


Passive / Active Input, Two Passive / Active Outputs Universal Analog Splitter
Universal analog splitter

GAi34 is a DIN rail mount splitter for analog signals. It has two isolated and independent outputs. The input and each output independently can be configured to any combination of active / passive, 0-20 mA, 4-20 mA, 0-5 V, 0-10 V, 1-5 V, 2-10 V. It needs 24 VDC (21.6 - 26.4 V) for power. No programming required, the device can be configured on the field in seconds by setting a couple of DIP switches only.


Isolated pH/ORP Transmitter with Universal Analog Output
Isolated pH/ORP Transmitter

GpH141 is a DIN rail mount isolated transmitter for pH/REDOX/ORP. It has one universal analog output that can be configured to active / passive, 0-20 mA, 4-20 mA, 0-5 V, 0-10 V, 1-5 V, 2-10 V. It needs 24 VDC (21.6 - 26.4 V) for power. No programming required, the device can be configured on the field in seconds by setting a couple of DIP switches only.


Isolated pH/ORP Transmitter with RS485 MODBUS RTU
Isolated pH/ORP Transmitter

GpH141-MB is a DIN rail mount isolated transmitter for pH/REDOX/ORP. It has an isolated 5V RS485 two wire port fully compliant to MODBUS RTU standard. It needs 24 VDC (21.6 - 26.4 V) for power. All programming is done over the communication port.


Isolated mV and Thermocouples Transmitter with RS485 MODBUS RTU
Isolated mV and Thermocuople Transmitter

GTT203 is a DIN rail mount isolated transmitter for various mV signals or 11 types of thermocouples, programmable. It has an isolated 5V RS485 two wire port fully compliant to MODBUS RTU standard. It needs 24 VDC (21.6 - 26.4 V) for power. All programming is done over the communication port.


 
Universal temperature transmitters with MODBUS RTU